数控卷板机浅谈减速箱设计和它的的校准

    在这篇文章中我们重点描述数控卷板机减速箱设计喝它的的校准。 In this article we introduced the numerical control machine reducer design and its calibration. 卷板机减速箱设计。减速器是由封闭在箱体内的齿轮传动构成的。经常用于原动机与运作机之间作为减速的传动装备。快速的电动机经带传动喝减速器，降低速度后驱动带式传输机。因为减速器结构严密，效率高，运用维修方便，因此运用普遍。 Machine reducer design. Reducer is composed of closed in the casing of gear transmission. Between the prime mover and work machine is commonly used as the reduction gear. High speed by the belt drive of the motor and reducer, drive belt conveyor after reducing speed. Because of the speed reducer compact structure, high efficiency, convenient operation and maintenance, and wide application. 数控卷板机的校准。拧紧螺栓，必须时用填隙片放在螺栓下边调配平衡。用叉车或千斤顶只从承重梁两边或承重梁自身的背面提及起机器进行校平，不要靠到机器的其他所有部分。 Calibration of nc machine. Tighten the bolt, if necessary, use filler piece placed under the bolt to adjust levels. With bearing beam of the forklift or jack only from two side or the back of the bearing beam itself mention leveling machine, don't rely on any other parts of the machine. 1.机器必须用精密的平衡仪沿两个轴向校平： 1. The machine must use precision level along the two axial leveling: 2.两个机架：检查他们彼此是不是完全同相，为了完全同相，必须时运用填隙片（这是准确运用机器的必须前提）。 2. Two racks: check whether they completely in phase, in order to completely in phase, when it is necessary to use filler piece (this is necessary for the proper use of the machine). 3.在上压辊的纵轴：将平衡仪放在上压辊的正中央，在马达箱/卡轭方向上。 3. The roller on the vertical axis: put on the center of the roller, the level on the direction of motor/card yoke. 4.在侧压辊的横向上：将平衡仪放在两个压辊的两段靠近各个机架。 4. On the side roller transverse: put two level two close to each frame of a roller. 如上是数控卷板机的减速箱设计喝校准。 The above is the reducer design and calibration of numerical control machine.